SPLASH GUARDS / MFES-JEEP JK
$65.00
- JEEP JK (2OO7+ WRANGLER)
- REDUCES DAMAGE CAUSED BY ROCKS,
MUD, AND DEBRIS THROWN FROM TIRES - LIGHTWEIGHT / HIGH-STRENGTH
- 6061-T6 ALUMINUM CONSTRUCTION
- 2-STAGE POWDER COATING
- TRIPLE -COATED GRADE 8.8 FASTENERS
- BOLT-ON INSTALLATION
- INCLUDES 2 SPLASH GUARDS
Pronghorn Overland Gear – MFES-JK-OO1OA
Out of stock
Mud, water, rocks and debris. Exposure to these elements is the preferred life of the off-road and expedition vehicle. However, mud, rocks and debris can easily turn into an airborne hazard when thrown by aggressive mud and all-terrain tires.Our MFES-JK Splash Guards (2 per set) are designed to address one half of this problem by acting as an “upper mud flap” for the top of the MFES-JK. These guards sharply reduce the amount of mud, water, rocks, and debris being thrown forward from your tires by filling the gap between the outer section of the MFES-JK and the factory Jeep fenders.
- Rust-Proof, Impact Resistant Design
- 6061-T6 Aluminum Construction
- Laser Cut and CNC Bent
- 2-Stage Powder Coating
- Triple Coated Grade 8.8 Fasteners
- US-Made
- 2 Splash Guards Per Set, Includes All Fasteners
Outfitting your vehicle for off-road and expedition work comes down to selecting the right gear for the specific terrain and task at hand. When we designed the MFES-JK we weren’t just redesigning the traditional front-end system, but also redesigning how people are better able to use their off-road gear. In addition to lightweight and high-strength performance we have added a new level of functionality to off-road equipment in the form of numerous accessories and tools that change the standard front bumper into a full function accessory mounting system for the Jeep JK. We let you choose the accessories and tools you need for your off-road and expedition efforts. In addition to these accessories we also offer a full line of Recovery and Winch Gear options.
Front Skid Plate
For additional underbody protection we designed our dual-plate, all-aluminum, Front Skid Plate. This design uses a 3/16” 6061-T6 aluminum primary skid plate that joins the MFES-JK to the Jeep JK factory impact beam. We then added a secondary 3/16” layer to the design, also 6061-T6 aluminum, to provide additional impact protection and durability.
Aluminum construction ensures lightweight and rust-proof performance and both skid plate components receive a 2-stage matte black powder coating. All fasteners are grade 8.8 and OE-grade triple coated for maximum corrosion protection (1000+ hr salt spray test).
Hi Lift Shackle
The Hi Lift jack is a highly effectively off-road and expedition tool. It can also be highly dangerous as the jack has a bad habit of wanting to slip out from under the vehicle during lifting. Our Hi Lift Shackle removes this danger by providing a secure, no-slip, fully pivoting mounting point for the Hi Lift jack that still allows the jack to align properly to the load without jamming or damaging the bumper. Or the user. The MFES-JK includes dedicated Hi Lift jack cutouts in the bumper structure, but even with these jacking points the jack can become trapped by the bumper structure if the vehicle tips, causing damage to the bumper body and the coating.
The Hi Lift Shackle mounts in two dedicated mounting points on the MFES-JK outer sections (stub and standard width) and can be used in the two GearMount mounting points as well, giving you four mounting point options on the MFES-JK. It will also work with our Modular Rear Bumper System (MRBS) and side rail systems. CNC machined from 7075 T-6 aluminum. Rated at 12,000 lb MBS.
Splash Guards
Our optional Splash Guards for the MFES-JK are designed to reduce water, mud and rocks being thrown forward from your tires onto the MFES-JK outers. The guards fill the gap between the outer section of the MFES-JK and the factory Jeep fenders. They have been tested and designed to provide a maximum balance of performance and protection without adding unneeded material. The Splash Guards are cut from 3/16” 6061-T6 aluminum and are 2-stage powder coated in matte black. Fasteners are grade 8.8 and OE-grade triple coated for maximum corrosion protection (1000+ hr salt spray test).
Traction Cleats
In some off-road and expedition scenarios you may be working in heavy mud (think Camel Trophy) or the challenge may be snow and ice. In either case you can find that climbing up on the front bumper can be a risky maneuver with the chances being fairly good that you either slip off the bumper or find yourself face down on the hood of the vehicle. For our friends in these environments we have designed our Tractions Cleats. Unlike diamond plate or grip tape, which quickly become useless is mud and snow/ice scenarios, the Traction Cleats are aggressive aluminum cleats that bolt on to the upper surface of the MFES providing a secure, non-slip, foothold in the worst conditions. The Traction Cleats attach at 12-14 pre-drilled locations on the upper surface of the MFES-JK. Each cleat is cut from 6061 aluminum and 2-staged powder coated to match the MFES-JK. The Traction Cleat kit comes with 4 Traction Cleats and associated fasteners (triple coated).
GearMount™ Accessory Mounting System
Off-road and expedition vehicles are all about gear and cargo and how to move them safely and easily. Our innovative GearMount accessory mounting system allows you to quickly and securely improve the gear and cargo capacity of your Jeep JK by giving you the ability to transform your MFES into a high-strength, high performance gear and cargo platform. Our system consists of two dedicated mounting hardpoints that allow you to easily attach a variety of off-road and expedition components ranging from cargo racks to winches to work tables. Whatever you need is easily and securely attached to the MFES-JK, as well as our Modular Rear Bumper System.Unlike traditional receiver hitch mounted designs, our patent pending, dual mounting point locking system gives you a stronger and more stable accessory mount that allows you to attach or remove an accessory in under three minutes. Our design also removes all free play from the mounting. All of this innovation translates directly into more load capacity and durability in rough terrain.
The MFES-JK Splash Guards are constructed from laser cut, CNC bent, 3/16” thick 6061-T6 aluminum plate. This rust-proof, high-strength, lightweight material provides excellent strength and impact resistance. In addition, the aluminum construction provides a rust-proof structure, which is critical for long term durability in a component designed to endure frequent rock and debris strikes that will damage and remove protective coatings.Corrosion and Coatings
Our all aluminum design doesn’t need a coating to withstand rust and we could ship them uncoated without
To ensure high-strength performance we use all grade 8.8 fasteners on the MFES-JK Splash Guards. These are treated with a 3-stage OE-grade coating for maximum corrosion protection (1,000+ hr salt spray test certification).
- 3/16” 6061-T6 Aluminum
- Laser Cut and CNC Bent
Powder Coating and Protection
- Corrosion Resistant Aluminum Construction
- 2-Stage Powder Coating
- Triple Coated Grade 8.8 Fasteners
Vehicle
- 2007+ Jeep JK Wrangler (w/ MFES-JK)
Required Tools and Materials:
- The MFES-JK is a No Cut / No Drill installation. To efficiently complete the installation of your MFES-JK you will need the following tools and materials, in addition to those parts supplied with your MFES-JK.
Tools
- 7mm Socket (and suitable ratchet)
- 10mm Socket (and suitable ratchet)
- 17mm Socket (and suitable ratchet)
- 19mm Socket (and suitable ratchet)
- Phillips and standard screwdrivers
- 7mm Wrench (box/open)
- 10mm Wrench (box/open)
- 17mm Wrench (box/open)
- 19mm Wrench (box/open)
Materials
- Masking Tape
- Touch-up Paint (for vehicle frame if required)
MFES-JK Install Guides:
Manufacturer: Pronghorn Overland Gear
Model Number: MFES-JK-OO1OA
Download and print out the Accessory Products Guide
Related products
-
HI-LIFT SHACKLE
$95.00 Read more -
LinkTrac LXP
$185.00 – $740.00 Select options